Leave Your Message

Comfly Fully Automatic Male Masturbator

Step-by-Step Assembly Guide for Product Experience

Looking to unlock the full potential of your Comfly fully automatic wearable masturbator? This guide will walk you through the assembly process step by step, ensuring a smooth setup and an enhanced, immersive experience from the very beginning.

Step 1: Set Up the Base Support

Start by unfolding the base support into an “X” shape to ensure stability.

  • Release the locking handle on the support rod
  • Adjust the rod to a vertical 90-degree position
  • Secure it firmly in place

This creates a solid foundation for the entire setup.

 

Step 2: Install the Red Expansion Base

Next, take the red expansion base designed for the insertive massage head.

  • Align the slotted side with the base
  • Push it firmly into position until secured

This component prepares the unit for the main body installation.

 

Step 3: Attach the Main Unit

Now it is time to mount the main body onto the base.

  • Pull out the red button located at the back of the unit
  • Carefully slide the main body onto the support rod
  • Once fully seated, release the red button
  • Insert the crossbar of the red expansion base into the matching slot

This completes the secure connection between the main unit and the base.

 

Step 4: Install the Insertive Massage Head

For users seeking a more dynamic experience, you can activate the vibration feature.

  • Insert the vibrating motor into the designated slot (ensure correct orientation)
  • Connect the battery box to power the vibration
  • Attach the massage head to the rear massage rod
  • Set the locking handle to a vertical position before inserting
  • Make sure the smooth side of the rod faces upward
  • Insert it into the socket, then rotate the handle horizontally to lock it in place

Now your rear massage component is fully assembled.

 

Step 5: Mount the Rear Massage Rod to the Bracket

  • Insert the rear massage rod into the groove on the massage bracket (smooth side facing up)
  • Locate the silver knob at the bottom
  • Tighten it securely to fix the component in place

This ensures stability during use.

 

Step 6: Install the Front Massage Component

  • Identify the two slots on the massage bracket
  • Insert the front massage rod into the outermost, front slot
  • Push the red connector into place until you hear a “click”

This confirms that the component is securely installed.

 

Step 7: Final Assembly onto the Main Unit

Now bring everything together:

  • Adjust the fixing ring on the main body to a horizontal position
  • Insert the massage bracket into the fixing ring, with the front component facing upward
  • Align the red three-prong structure with the black two-prong connector on the main unit
  • Secure everything with the locking bolt

Finally:

  • Thread the traction rope through the traction rod
  • Pass it through both cord locks and pull it tight

✅ Assembly Complete – Ready to Enjoy

Your Comfly fully automatic wearable system is now fully assembled and ready to use.

 

💡 Pro Tip

For the best experience, take a moment to double-check each connection and ensure all components are securely locked in place before use.